Coway BAS25-AMY, Руководство пользователя

Страница: 10 / 36

IMPORTANT!
 Connect product to power.
Plug the power cord and press the Power button on the control panel to turn on the bidet.
The bidet only functions properly when it is connected to power.
 Open the main water supply valve.
A water source must be supplied to the product for it to function properly.
After completing the installation, and before using, remove the protective film on the product and the remote control.
 Check the remote control before use.
The remote control will not function properly if it is not paired or if the bidet is switched off.
If the bidet does not work when you press a button on the remote control, turn on the bidet and set the pairing connections.
When batteries are low and need to be replaced, the LED will flash 3 times whenever a button is pressed. It will eventually
stop flashing and the remote control will stop working as the batteries run out.
*
Batteries are not covered by the warranty. You need to purchase and replace the batteries separately.
 Check the GREENPLUG before use.
- Setting up the GREENPLUG
∙ It allows smart control of the product based on user history.
∙ Regular usage time: Seat temperature will be set to "L".
∙ Non-usage time: On standby mode, seat temperature is kept at 23 °C.
∙ On standby mode, water temperature is kept at 20 °C. (Regular usage/Non-usage time)
∙ After sitting the temperature of water and the seat temperature are switched to user settings.
- Setting up general power saving mode
∙ After 1 minute: Seat temperature will be switched to "L".
∙ After 30 minutes: The power indicating LED on the control panel turns off and the power saving mode is initiated.
 GREENPLUG mode
Press and hold the GREENPLUG button until the GREENPLUG indicator lights up and the function is initiated.

After installation
Check there are no leakages between main water supply valve and hose.
There must be a rubber washer between the T-shaped connector and the main water supply valve.
Use a soft, dry cloth to wipe the bidet and the remote control after shower or cleaning the bathroom.
 Regular filter replacement
Replacing the filter regularly is crucial for hygienic cleansing. If you are using an old filter, the filtering performance
will degrade and may spray unfiltered water. Always replace the filter according to the recommended interval.
*
Filter replacement interval: Every 4 months
 Prolonged periods of non-usage
If the product has been unused for an extended period of time, make sure to replace the filter and clean the nozzle, seat
and the product according to appropriate cleaning methods before use. (For more details, see page 23)
This product is for 220 ~ 240 V - 50 Hz only.
Connect the power plug to a grounded electrical outlet for 220 ~ 240 V - 50 Hz. Tips
Remove the protective film on the remote control before use.
Tips