background image

How to set special modes

3.  Automatic drain mode

 Press the Nozzle Cleansing button on the control panel and there will be a "beep" sound 

with a display of the current settings on the LED. (ON: Activated, OFF: Deactivated)

Press the Nozzle Cleansing button to activate or deactivate the automatic drain mode.

If the automatic drain mode is activated, water in the tank will be automatically 

drained via the nozzle and the hose to maintain a hygienic environment after the 

product is unused for 48 hours.

-  Activated: LED on the main body turns on.

-  Deactivated: LED on the main body turns off.

*

  The automatic drain mode is initially being set as deactivated. 

1.  Silent mode

 Press the Power button on the control panel. There will be a "beep" sound 

and the LED will indicate the current status. (ON: Activated, OFF: Deactivated)

Press the Power button to activate or deactivate the silent mode. 

The silent mode also mutes the button sounds on the remote control.

-  Activated: LED on the main body turns on.

-  Deactivated: LED on the main body turns off.

*

 The silent mode is initially being set as deactivated. 

2.  Seat sensor lock mode

Press the Cleansing button on the control panel and there will be a "beep" 

sound together with the display of current setting on the LED. (ON: 

Activated, OFF: Deactivated)

Press the Cleansing button to activate or deactivate the seat sensor lock mode. 

If the seat sensor lock mode is activated, the cleansing, bidet and dry 

functions are only enabled when the sensor detects a human body.

-  Activated: LED on the main body turns on.

-  Deactivated: LED on the main body turns off.

*

 The seat sensor lock mode is initially being set as activated. 

4.  Sterile water cleansing mode

Press the Nozzle Cleansing button on the side control panel for 2 seconds 

and there will be a "beep" sound and the current status will be displayed 

with the LEDs. (ON: Activated, OFF: Deactivated)

Press and hold the Nozzle Cleansing button for 2 seconds to activate or 

deactivate the sterile water cleansing mode. 

The sterile water cleansing mode uses electrolysed sterile water for 2 

seconds before proceeding with the general cleaning process. When 

deactivated, only the general cleaning process is carried out.

-  Activated: LED on the main body turns on.

-  Deactivated: LED on the main body turns off.

*

  Sterile water cleansing mode is initially being set as activated.

Press and hold the Power button together with the Cleansing button on the 

control panel for 2 seconds. There will be a "beep" sound and the LED will turn 

off, indicating that the mode is being accessed.

*

  You will be automatically directed out of the special mode if no action is taken for 10 

seconds.

IMPORTANT!

Содержание BAS25-AMY





































Отзывы: