Coway BAS25-AMY, Руководство пользователя

Страница: 17 / 36

16
15
CHOOSING THE DESIRED CLEANSING
For rear cleansing
 Cleansing
Sit down and press the Cleansing button on the control panel.
- The nozzle drains cold water before cleansing water is sprayed so cleansing begins at
the previously set temperature.
- Cleansing water will spray for 1 minute and stop automatically.
- When the nozzle retracts, the nozzle is cleaned automatically for 6 seconds.
* Press the Move button to adjust the position of the nozzle.
* Press the Cleansing button again while in operation for an additional minute of
cleansing.
* You can adjust the warm water temperature, water pressure and nozzle position
according to your preference.
 Move
Sit down and press the Move button on the control panel.
- The nozzle moves back and forth to cover a wide area.
* This continues while the cleansing function is used.
* Press the Move button to adjust the position of the nozzle.
* Press the Move button again to stop the nozzle.
 Dry
Sit down and press the Dry button on the control panel.
- Warm air is emitted for 2 minutes to dry the wet areas.
* Wipe the wet area lightly before using dry feature to speed up drying.
* Press the Warm Water/Air Temperature
button to adjust air temperature.
* Press the Dry button again during use to add an additional 2 minutes of
drying.
* If you press the Dry button while cleansing, cleansing function stops so you
can start drying immediately.
 Stop
Press this button to stop all currently operating functions.
- All current operating functions stop.
* The dry function stops 2 seconds after the Stop button is being pressed.
H
ow t
o U
se
AUT
OM
ATIC
STERILISA
TION
/REAR
CLEANSING
WITH
STERILE
W
ATER
/ CHOOSING
THE
DESIRED
CLEANSING