Costar CR1000INT, Руководство пользователя

Страница: 7 / 31

One-Channel Video Transmitter
1
Chapter 1 — Introduction
1.1 In This Manual
This manual is intended for users of the one-channel network video transmitter (network video encoder)
and includes instructions for using and managing the transmitter on the network.
1.2 Features
This network video transmitter compresses live video from analog cameras and transmits the video over
Ethernet connections. The transmitter can be accessed, configured and managed by using the INIT
(Integrated Network Installation Tool) program. It has a built-in web server allowing you to monitor
live video remotely using a web browser. The remote programs (RASplus and iNEX Basic) provided
with the transmitter also allows remote management, monitoring and recording. This transmitter
offers the following features:

Auto detection for NTSC and PAL
 Dual streaming for monitoring and recording
 H.264, MPEG-4 and M-JPEG compression algorithm
 Four levels of video compression and various video compression resolutions
 Two-way audio communication
 Pre- and post-event buffering and video stream buffering to enhance reliability of network recording
 Remote monitoring via web browser or remote software

Compatibility with Genetec Omnicast software using Genetec Protocol (RTSP Port: 554)
 Automatic HTML code generation for webcasting on a user’s website
 Up to 20 simultaneous connections to the transmitter
 Enhanced security using IP address filtering, HTTPS and SSL functions and password protected
multiple user levels
 Network bandwidth limit and MAT functions to use network bandwidth efficiently
 ONVIF protocol supported
 Convenient firmware upgrades via either the USB port or the network
 Firmware duplication and autorecovery functions to enhance system stability
 Management of multiple transmitters via Ethernet connections

Event detection functions: alarm-in, motion, video loss, video blind
 Power sources: 12 VDC, 24 VAC, PoE (Power over Ethernet)
 RS485 interface for controlling a PTZ camera

1-channel alarm in and out
 1-channel audio in and out
NOTES:
 Remote monitoring and recording through dual streaming are available by using the RASplus and
iNEX Basic programs provided with the transmitter.
 In this manual, a “remote system” refers to a PC that the remote program or WebGuard program is
running, or a network video receiver.