Costar CR1000INT, Руководство пользователя

Страница: 24 / 31

User’s Manual
18
Video Loss
When the transmitter has lost video, it considers the video
loss as a video loss event.
 Event Action : Check the box for each action the
transmitter will take whenever it detects a video loss
event.
− Alarm Out : Check the box to trigger an alarm-output
signal.
− Send Email : Check the box to send an email.
− Remote Callback : Check the box and select the remote
systems to send a message (Not supported for the
WebGuard program).
NOTE:
You must properly configure the settings related to each event action during
3.6 Event – Event
Action
setup to enable event actions.
Video Blind
Check the Video Blind box to set up a video blind event.
When the transmitter detects that more than 70% of a
camera is blinded by anything, it considers the video blind
as an event.

Sensitivity
: Adjust the sensitivity for the video blind.
 Activation Time : Adjust the duration that a video blind
should last to be considered a video blind event. The
transmitter will not consider any video blind as a video
blind event if it is shorter than the preset time.
 Use Ignoring Time : Set up the event ignoring time. The transmitter will not consider video blind
that occurs during the preset time span as an event.
 Event Action : Check the box for each action the transmitter will take whenever it detects a video
blind event.
− Alarm Out : Check the box to trigger an alarm-output signal.
− Send Email
: Check the box to send an email. Selecting a camera in the
Image Attachment
field
attaches an event detected image file (.JPG) to the email.
− Remote Callback : Check the box and select the remote systems to send a message (Not supported
for the WebGuard program).
− Move PTZ to : Click the Setup… button to move a PTZ camera to the previously saved preset location
and select the desired preset number. You must set up preset locations of a PTZ camera using remote
programs or a web browser.
NOTES:
 Video blind events might NOT be detected for a camera with a very noisy image especially when set
for low Sensitivity values.
 You must properly configure the settings related to each event action during
3.6 Event – Event Action
setup to enable event actions.