Costar Video Systems CDC2040MI, Инструкция по эксплуатации

Страница: 43 / 52

43
5.2.5.5 FOCUS
In this section you can set the focus mode. Available options are:
AUTO: The camera adjusts the focus automatically while
monitoring the screen continuously in the auto mode. In this
mode the zoom key operation is not recognized as the input of
the focus key.
MANUAL: The user can adjust the focus manually
ONE PUSH: Only if the camera is not moving, it turns into the
manual mode. Same controls as manual
5.2.5.5.1 FOCUS SETUP
ZOOM TRACK: When it is turned ON the focus function is
executed when the zoom function is ON. SPEED-FAST will
speed up the ZOOM, Slow has the opposite effect.
D-ZOOM: Magnification of the Digital Zoom can be selected
from OFF-2X-10X.
Additional options are available such initial position and
magnification including Lens Initialization.
NOTE: It is recommended that you set digital zoom before
setting preset positions. As magnification increases, picture
quality decreases.
5.2.5.6 EXPOSURE
Camera Exposure can be controlled.
Brightness: The brightness of the screen can be adjusted
Iris: Auto or manual mode can be selected
Auto: The image signal can be adjusted relevant to the
amount of available light.
Manual: User can adjust the level
Shutter: Electronic shutter is enabled. The shutter speed is
controlled automatically according to screen brightness.
AFLK: Use this mode when the screen flickers because of
inconsistent frequency of surrounding lights.
5.2.5.6.1 EXPOSURE SETUP
Manual: Shutter speed can be adjusted manually from 1/60 to
1/120000 of a second
SENS UP function can be operated manually from x2-x128
Additional options available:
Move the joystick to the END selection
Press
IRIS CLOSE
button to exit or return to the previous