20
4.5 Direct Input Commands for Dome Operation
The following preset position addresses are reference to the direct memory location of the dome
controller. They do not correspond to memory preset positions in the keyboard controller or software
applications that support PTZ preset functions. Please consult the manual of the chosen keyboard
controller for correct operation.
Dome preset memory locations:
No. 1
50, 64 ~77 and 102~165
total 128 preset positions
Special Function memory preset location:
No.51
63, No.78
101.
The following commands are examples of direct Keyboard Entry from
CDC2500MKB Model
Select Dome ID 01:
[1] + [ENTER]
Keyboard Display: Dome ID:0001
Save preset position 01:
[1] + [SHOT] + [ON]
On Screen Display: Stored
Recall preset position 01:
[1] + [SHOT] + [ACK]
Clear preset position 01:
[2] + [SHOT] + [OFF]
Setting Auto Pan scanning between two points:
The dome can conduct an auto Pan Scan between
two user preset points. You can operate the Tilt and Zoom controls at the same time without
interrupting the Auto Scan Motion.
Set Start Pan Position:
[52] + [SHOT] + [ON]
Set End Pan Position:
[53] + [SHOT] + [ON]
Setting the Pan speed: user needs to maintain a fixed manual scan speed for more than 3 seconds and
then press [51] + [SHOT] + [ACK] to save this speed as default Pan scan speed.
The dwell time of “starting point” and “ending point” of Pan scan is 2 seconds.
Start Auto Pan:
[52] + [SHOT] + [ACK]
To Stop the Auto Scan move Joystick left or right.
You can resume Auto Scan by pressing again [52] + [SHOT] + [ACK]
Operating a preset tour:
Auto point by point scan from preset point 1 to preset 16; (if a certain point
is not set or has been cleared, that point will not observed when “tour scan” is in progress.
The dwell time of each preset point in tour is 4 seconds.
Start Default Preset Tour : [51] + [SHOT] + [ON]
Please refer to the operation manual of keyboard control for the operation of the other six tour tracks.
To Stop the tour move the joystick of the controller in any direction “Pan” or “Tilt”.
Содержание CDC2040MI
Страница 2: ...2 THIS PAGE IS INTENTIONALLY LEFT BLANK ...
Страница 52: ...52 Printed in the USA Rev M0807415 ...
