Costar Video Systems CDC2040MI, Инструкция по эксплуатации

Страница: 32 / 52

32
5.2.3.1.4 Tilt Reverse
Move the joystick up or down to the desired selection.
Move the joystick Left or Right to choose ON or OFF
This allows the user to control the standby position of the PTZ.
When turned ON, the PTZ will return to Home Position when it
remains idle for more than 5 minutes.
5.2.3.2 Set Default Function
Move the joystick up or down to the desired selection.
Move the joystick Left or Right to make selection.
Different options are possible based on the function you
selected including sub- menus with additional options.
Press
IRIS CLOSE
button to exit and return to the previous
menu level.
5.2.3.2.1 Default Function
This defines the behavior of the dome to respond to a preset or a
vector as the default position.
Move the joystick Left or Right to select
P=preset, V= Vector
5.2.3.2.2 Number
The default number is 001. Move the joystick left or right to
position the cursor under the desired numeral and press
IRIS OPEN
button to move the cursor on the second numeral
line (0~9). Move the Joystick left or right again under the
desired numeral and press
IRIS OPEN
button again to select
the desired number (0~9). Press IRIS OPEN button again to
confirm the selection. Press
IRIS CLOSE
button to finalize
your selection and return to the previous menu level.