Costar Video Systems CDC2040MI, Инструкция по эксплуатации

Страница: 19 / 52

19
4. Quick Start Operation Guide
CAUTION: D
o not turn the power ON until you have finished all connections and communication settings).
4.1 Connect the power to the dome
.
As soon as the power is turned ON, the dome initiates a self test which includes a rotation of the dome on both axis and
the camera will display a brief menu followed by a live image on the monitor.
Note:
During self-testing, it is normal to hear a clicking sound caused by the camera module for about 2~5 seconds of
vertical movement, as a result of the vertical self alignment.
4.2 Joystick controller setting
.
Set the protocol, baud rate, and address of the keyboard controller to match the settings on the dome
(For instructions of how to set the keyboard communication settings please refer to keyboard controller manual).
Attention : If the protocol setting of the dome is set to auto detection, the protocol of keyboard controller can be set
arbitrarily. But its baud rate should be set identical with that of the dome device.
4.3 Start testing
.
When all of the above settings are completed you can start testing to dome functionality.
1. Direction control test of dome device 2. Zooming control test of camera
Please refer to the next section for demonstration of menu operation and control of dome device.
4.4 Complete the test
. (Summary).
If you have achieved control of the dome device as described in section 4.6 above, the system is
basically normal. Do not change the wiring or the applied settings.
If the dome does not respond to the commands or only partial functionality is achieved, verify the
wiring connections (section3.1 and 3.2) and communication parameter settings (sections 2.4, and
2.5) carefully.
U
p
D
ow
n
L
eft
R
igh
t
Zoom in
Zoom out
R
ota
te
The operation of the dome and the direction (up,
down, left and right) of the camera can be
controlled using the joystick of the keyboard
controller, as illustrated above. Zoom control of the camera can be achieved by
rotating the knob on the joystick or by using TELE
(zoom in) and WIDE (zoon out) functions on the
keyboard controller as illustrated above.