background image

− 2 −

Introduction

Product

Model number

Feature

Combustible Gas Detector

XP-3110

Measures combustible gas concentration in a 

range of 0% to 10% or 0% to 100% (LEL).

High-concentration Gas Detector

XP-3140

Measures high-concentration gas in a range 

up to 100 vol%.

High-sensitivity Gas Detector

XP-3160

Highly sensitive and ideal for gas detection 

in ppm.

Thank you for purchasing the XP-3000 series Portable Gas Detector. To ensure proper use, please 
read this operation manual thoroughly before using the product to prevent gas accidents and to conduct 
maintenance inspections.
Be sure you fully understand this manual regardless of whether you have used a Gas Detector before or 
not. Do not use the product in ways not described in the manual.
The following three types of XP-3000 series Portable Gas Detectors are available.

1. Introduction

Operating conditions:

  Replace batteries only in area know to be NON-HAZARDOUS.

  Use the Gas detector in the carrying case specified by New-Cosmos Electric.

  As a comprehensive measure for the prevention of danger resulting from static electricity.

It is desirable for the user carrying the Gas Detector to wear antistatic clothing and 

electrically conductive shoes(antistatic work shoes). The floor should also be electrically 

conductive( with an electrical leakage resistance of 10 M

Ω

 or less.)

  In the measurement of the oxygen density, do not use the Gas Detector for any mixtures 

other than air mixed with combustible gas or steam mixed with toxic gas.

  Warning-Substitution of components may impair intrinsic safety

  Use only Panasonic LR6XJK, Toshiba LR6, or Duracell MN1500 batteries

  Warning-Do Not Replace Batteries when an explosive gas atmosphere may be present

  Warning-Potential Electrostatic Charging Hazard-Do not remove leather case in a hazardous 

location

  Warning-Do not connect anything to the USB port when an explosive gas atmosphere may 

be present(Um=5.5V)

 Explanation of Symbols

The following symbols are used for safety purposes:

 Explosion-proof Precautions

Follow the explosion-proof XXXXXXXXXX.

DANGER

WARNING

CAUTION

:  Indicates a hazardous situation that, if not avoided, could result in serious 

injury or death.

:  Indicates a potentially hazardous situation that, if not avoided, could result 

in serious injury or death.

:  Indicates a potentially hazardous situation that, if not avoided, could result 

in minor injury or physical damage.

: Indicates operational advice and/or instructions.

Note

Содержание XP-3110

































Отзывы: