corob EVOFLX-LW, Руководство пользователя

Страница: 28 / 45

COROB EVOFLX-LW
- 26 -
7.5 Refilling the canisters
1. Press the off-line button for an instant (chapter 6.5).
2. Remove the lid of the canister to be filled .
3. Add the desired colorant to the canister so as to avoid spattering or creating air emulsions in the colorant.
4. Close the canister with its corresponding lid.
5. Bring the machine back to the on-line condition using the off- line button (chapter 6.6).
6. Repeat the above steps to fill other canisters .
dd
Shake the container of colorant to be poured into the canister manually. Do not use automatic shakers .
WARNING
NEVER pour colorant directly onto the stirrer shaft.
The colorant level MUST NOT exceed the maximum level, placed at 1.5 cm (0.6”) approx. under the recirculation
connector.
Colorant spills cause the circuit pumping unit to be blocked.
WARNING
In case of improper actions, which caused canister overfilling with colorant:
• In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and
contact an authorized service center.
• If, on the contrary, the product has already poured out of the canister, it is necessary to shut off the machine
immediately and clean with paper or a moistened cloth. Whenever possible, leave the colorant to dry itself and
remove with a spatula.
• If the product has not yet come out of the canister borders, it is necessary to avoid closing the canister with its
lid and provide immediately to dispense the exceeding colorant until the correct level is reached. Clean
carefully the upper border of the canister with paper or a moistened cloth before closing it with the lid.
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
DANGER
When using colorants containing volatile solvents the canister top up must be carried out opening one canister
at the time.
Avoid naked flames or material that may create sparks and cause a fire
.
WARNING
Failure to update the colorant levels in the canisters may compromise the accuracy of the hue produced or, worse
yet, lead to emptying the machine canisters and circuits
.
dd
We recommend that you keep the canisters full at all times by topping up frequently.