PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 1 of 4
PSD1-1000 - Soap/Hand Sanitizer Dispenser
April 2020
Page 2 of 4
PSD1-1000
Hand Sanitizer/
Soap Dispenser
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
We recommend reading through the entire information booklet prior to proceeding with
installation, service and maintenance. All references to left and right throughout the booklet
are as viewed from the front of the restroom.
~~Tools Required~~
• Marker
•
Drill • 13/64” Drill Bit • Rivet Gun
Installation
Step 1.
Remove the lid by turning
counterclockwise and lift up.
Step 2.
Push the locking tab back and lift up
on the dispenser container.
Step 3.
Holding the backing plate in the place
where you would like to mount the dispenser,
mark the placement for the three mounting
holes.
Step 4.
Secure the backing plate in place using
the desired fasteners.
Step 5.
Slide the liquid container back in place,
making sure the locking tab is in place, and fill
with desired soap or hand sanitizing solution. If the
dispenser is fitted with a foaming pump, only foaming
soap/hand sanitizing solution may be used.
Step 6.
Replace the lid and secure in place by
turning clockwise.
Full Size Scale Fasteners
(3) PC-000102 Rivet
1) Push In Tab
2) Lift Up Container
Maintenance and Care
•
Use only mild cleaners with no abrasives
using a soft cloth to clean all surfaces.
•
Some silicone grease should be applied
occasionally to the o-ring at the top of the
soap container to keep the lid from sticking.
Mineral oil should NEVER be used.
•
If there is a chance for freezing, remove the
dispenser and drain the soap. Be sure to
remove the soap from the pump as well.
The
PSD1-1000 PolyJohn hand sanitizer/soap dispenser is the first dispenser
designed specifically for the portable restroom
environment. These features include:
•
A completely sealed container to
keep liquid from spilling when
transporting the restroom
•
A lid that secures onto the container
after removing from the restroom
for spill-less storage
•
Easy to clean, smooth surfaces
•
Made for r
egular liquid soap/gel
type sanitizing solution
•
One hand operation
•
Clear container to see the level of
soap
/sanitizer
General Overview
(3) PC-000105 Rivet
(3) PC-000106 Washer
Capacity: 30oz / 887ml
