corob EVOFLX-LW, Руководство пользователя

Страница: 5 / 45

- 3 -
COROB EVOFLX-LW
1 QUICK GUIDE
At t h e be g i n n i n g o f t h e wo rki n g d ay
• Check that the nozzle center is clean.
• ( With humidifier for solvent-based colorants or without humidifier) Check that the sponge is clean and
saturated; if it is necessary to saturate, use only appropriate liquid (the choice of the liquid depends on the nature of
the colorants, and must be done directly by the manufacturer of the products used).
• ( With humidifier for water-based colorants) Check that the water in the bottle is not below the minimum level.
• Carry out system Purge ( not necessary if the dispenser is equipped with Integrated Nozzle Valve System, INV) .
Th i n g s to re m e m be r
• Never let the machine in the OFF position.
• In the canisters, stirring of each colorant takes place automatically (stirring times can however be customized).
• Be careful not to fill the canisters with too much colorant. In case of overfilling, act as indicated in the user’s manual.
• The colorant to be poured inside the canisters must be stirred manually. Do not use automatic shakers.
• Close the canisters with their lids right after filling operations.
• Remember to update accordingly the canisters filling levels via the management software.
• ( With humidifier for solvent-based colorants or without humidifier) The sponge must be saturated at least twice
a week (the frequency of intervention is indicative, since it depends on the nature of colorants and the environment
conditions).
• ( With humidifier for water-based colorants) Top up the water bottle as soon as the minimum level is reached. Do
not exceed the maximum level.
At t h e e n d o f t h e wo rki n g d ay
• Refill the canisters.
• Update the canister filling levels in the management software.
• Shut down the computer. Do not shut off the machine.
It i s re co m m e n d e d to ca re f u l l y re a d t h e u s e r’s m a n u a l .