corob EVOFLX-LW, Руководство пользователя

Страница: 23 / 45

- 21 -
COROB EVOFLX-LW
6.5 OFF-line button and WHITE lamp
When the off-line button is pressed , all functions of the machine are interrupted; the WHITE lamp blinks to indicate
that the machine is switched on but with the functions blocked (condition off-line 1 or off-line 2). In these
conditions
,
any commands coming from the computer are refused
.
The machine must be set to off-line 1 condition to perform canister refilling (chapter 7.5) and to off-line 2 condition to
execute maintenance operations that require the automatic cap to be open (chapter 8).
After interrupting the machine functions, it will be possible to carry out canister refilling .
6.6 Electrical connection and start-up
1. Plug the mains plug in a earthed wall socket and to the socket behind the machine.
2. Turn the power switch on (I) => The white lamp is ON.
6.7 Shut-down
1. Turn the power switch OFF (0)
2. Plug the mains plug from the earthed wall socket.
Press the off-line button.. . Initial condition Final condition WHITE lamp
... for an instant
on-line off-line 1 - machine functions blocked Blinking slow
off-line 1 on-line - machine functions restored ON
off-line 2 off-line 2 Blinking fast
... for a few seconds
on-line
offline 2 - the automatic cap opens,
machine functions blocked
Blinking fast
off-line 1
off-line 2
on-line - the automatic cap closes,
machine functions restored
ON
WARNING
Pressing the off-line button while a formula is being dispensed will cause dispensing to be interrupted. Once the
machine has been restored to normal operation, IT WILL NOT BE POSSIBLE to continue dispensing the formula
previously interrupted
.
d If the WHITE lamp does not come on, make sure that the emergency button is not pressed ( chapter 4.6 ) . If the
computer and monitor do not come on, make sure the power cables have been properly connected to the
power sockets, and that the corresponding switches have been turned on.
d
When the software is launched it offers the operator a series of procedure requests that have the purpose to
get the machine ready for use. These procedures are strictly related to the type of management software used
.
WARNING
WE RECOMMEND THAT YOU NEVER SHUT DOWN THE MACHINE , even when closed for business, because the
automatic, timed functions help keep the colorant preserved and homogeneous .
Should it be essential to shut down the machine, avoid keeping it off for extended periods of time. When the
machine is not being used, if necessary shut off only the computer
.
d
Very little power is used by the machine itself when inactive or during a stirring cycle .