Cornelius FCB - 2 Flavor, Руководство по обслуживанию

Страница: 72 / 76

Pinnacle 2 and 4 Flavor Service Manual
Delta Valve
1. Remove and rotate faceplate, as
shown, with valve facing Barrel.
Attach faceplate to two studs with
cap nuts finger tight. This holds
assembly in place for applying
torque to shank nut.
2. Place special spanner socket in
two slots on shank nut, making
sure slots are fully engaged.
Tighten shank nut, as shown, with
torque wrench and spanner socket.
Torque wrench setting is 10 lb-ft (or
120 lb-in). Socket part number is
620711709.
NOTE: Do not use any other tool or
method to tighten the shank nut.
3. After torquing shank nut locate
hammer and punch. The faceplate
must be removed from the unit and
secured to sustain impact from
staking.
NOTE: This procedure is used for
the stainless steel Delta valve only.
DO NOT use on plastic Motorman
Valve threads.
© 2003-2014, Cornelius Inc. - 68 - Publication Number: 560007298SER