Cornelius FCB - 2 Flavor, Руководство по обслуживанию

Страница: 25 / 76

Pinnacle 2 and 4 Flavor Service Manual
Menu 7 - SELECT DEFROST TIME & SET DEFROST TIME
From the SELECT DEFROST TIME menu the system automatic defrost cycles are set. These menus
program the automatic hot-gas defrost cycle for each freeze cylinder. The first menu sets the defrost
day(s) and the second menu sets the defrost time(s).
When ALL DAYS is selected, the defrost time entered into a specific defrost number will be scheduled for
every day of the week. When NONE appears, it means 1 of the following:
• no defrost time has been set for that defrost number;
• all of the times for that defrost number are not the same.
NOTE: All days can NOT be used to verify defrost times, only to set them.
SELECT DEFROST TIME Menu Button Descriptions:
#1 - BACK . . . . . . . go back to the previous menu
#2 - DAY . . . . . . . . . cycle through the list of days
#3 - GO . . . . . . . . . go to the second defrost menu (SET DEFROST TIME)
#4 - UP . . . . . . . . . . increase the defrost number for this day (#1-9)
#5 - DOWN. . . . . . . decrease the defrost number for this day (#1-9)
SET DEFROST TIME Menu Button Descriptions:
#1 - BACK . . . . . . . go back to the previous menu
#2 - DEF#. . . . . . . . cycle through the list of 9 defrost times per day
#3 - NEXT . . . . . . . cycle through time fields
#4 - UP . . . . . . . . . . increase item by 1 unit (hour or 15 minute segment)
#5 - DOWN. . . . . . . decrease item by 1 unit (hour or 15 minute segment)
Defrost times can be set in 30 minute increments. When NONE appears, it means that no sleep time has
been set for that day. The preset time format used by the system will be used by the SET DEFROST
TIME menu. See “3. Sleep Mode Recommendations” on page 7.
FIGURE 14
FIGURE 15
Defrost Time
Number
Defrost
Time
Defrost
Day
Select
defrost
cycle
Defrost Time
Number
Defrost
Time
Defrost
Day
© 2003-2014, Cornelius Inc. - 21 - Publication Number: 560007298SER