Page 5
PROCEDURE
1.
Unpack all parts and inspect for
damage.
2.
Use a 6mm allen key to remove the four
(4) M8 x 65mm socket head cap screws
securing the display weldment to the
top rail, then separate the weldment
from the rail.
8TR:
Remove the tie wraps securing the
display weldment to the top rail, then
remove the display weldment.
Fig. 3
3.
Remove the left and right sidebed
covers as well as the motor shroud.
Fig. 4
Required Tools:
• Metric Socket Set
• Metric Allen Key Set
• #2 Phillips Screwdriver
• 1/2” Open-ended Wrench
• 13mm Open-ended Wrench
Please note that all images are of the 8TRx unless otherwise noted.
ASSEMBLY
