Page 15
30.
Connect the data (
A
) and I/O (
B
) cables
to the MCB as indicated in Figure 25.
B
A
Fig. 30
31.
Re-seat the nose cap by pushing it
back into place, then secure it in place
by using a #2 phillips screwdriver to
tighten the six (6) screws from Step 8.
Fig. 31
32.
Reinstall the motor cover - ensure
that the lip of the motor shroud sits
underneath the side bed covers, then
use a #2 phillips screwdriver to secure
it to the frame using two (2) 10-24 x
3/4” pan head machine screws.
Fig. 32
