Page 7
6.
Use a 1/2” open-ended wrench to
secure the left side handrail to the
frame using three (3) 5/16” x 3/4” hex
head fl ange screws -
DO NOT FULLY
TIGHTEN.
8TR:
Please see Figure 8 - Use a 1/2”
open-ended wrench to secure the left side
handrail to the frame using four 5/16” x 3/4”
hex head fl ange screws.
7.
Repeat Steps 4-6 for the right side
handrail.
Fig. 7
8TR:
Fig. 8
8.
Use a phillips screwdriver to loosen the
six (6) screws (four (4) screws for
8TR
)
on top of the cap as indicated, then pull
the nose cap slightly forward to make
room for the mast.
Fig. 9
