Page 11
17.
Install the console weldment grommet
onto the console weldment.
Fig. 18
18.
Install the console weldment onto the
top rail, then pull the mast cable bundle
through the console weldment.
CAUTION:
Be careful not to pinch the
hotbar cables while installing the display
weldment.
Fig. 19
19.
Route the cables from the hotbar
through the hole in the display collar
as shown, then use a #2 phillips
screwdriver to secure the Gen. 2
display collar to the console weldment
(
FOR 8TR:
use the Gen. 1 display
collar) using two (2) of the M4 fl at
washers and four (4) of the #8-18 x 3/4”
pan head machine screws.
Fig. 20
