Page 9
11.
Use a 1/2” open-ended wrench to
secure the mast to the frame using two
(2) of the 5/16” x 3” hex head fl ange
screws and two (2) 5/16” x 3/4” hex
head fl ange screws -
DO NOT FULLY
TIGHTEN.
8TR:
Please see Figure 13 - Use a 1/2”
open-ended wrench to secure the mast to
the frame using four (4) 5/16” x 1 3/4” hex
head fl ange screws.
Fig. 12
8TR:
Fig. 13
If installing an embedded, touch-
screen console, please refer to the
install documentation that came
with the console.
12.
Pull the cable bundle from the mast
through the top rail.
Fig. 14
