Cooper Menvier 100, Руководство по установке, Страница: 33 / 38

Menvier40/100 Installer Menu
Page 29
1
Appears only when device learned in.
2
Appears only in a Ward based system.
3
Appears only in a Level Setting system.
4
Appears only if Exit Mode is “Final Door Set”, “Lock Set” or “Exit Terminate”.
5
Appears only if Exit Mode is “Timed Set” or “Silent Set”.
6
Appears only when System Options – Confirmation – Confirmation Mode is “Basic”.
7
Appears only when System Options – Confirmation – Confirmation Mode is “DD243” or
“BS8243”.
8
Appears only when System Options – Confirmation – Confirmation Mode is “BS8243”.
9
Appears only when System Options – Masking is “On”.
10
There is one Shunt Group available on Menvier40, five available on Menvier100.
11
Appears here only in a part setting system.
12
Options visible depend on communications module fitted, see Table 2 below.
13
Appears only when Report Type=Fast Format
14
Appears when Report Type=CID or SIA
15
Appears only when Static Test call disabled.
16
Appears only when Dynamic Test call is disabled.
17
Appears only when Report Type = Fast Format and Confirmation Mode = Basic.
18
Shows “None” if no module fitted.
Table 2. Menu Options Available with Communications Modules
With Communications Module
Communications Menu Options:
Control
unit only
i-
sd02
i-dig02 i-gsm02 8750 GPRS
ARC Yes Yes Yes Yes Yes Yes
ARC – IP Network No No No No Yes Yes
Speech Dialler No Yes No Yes No No
SMS Yes Yes Yes Yes No No
PSTN SMS Yes Yes Yes No No No
Line Fail Yes Yes Yes Yes Yes Yes
Line Fail Delay Yes Yes Yes Yes Yes Yes
IP Network (Own) Yes Yes Yes Yes Yes Yes
GPRS No No No No No Yes
Ethernet No No No No Yes No
Downloading - Rings to answer Yes Yes Yes No No No
Downloading - Answer on one ring Yes Yes Yes No No No
Downloading - Access Mode Yes Yes Yes Yes No Yes
Downloading - Phone Book Yes Yes Yes Yes No No
Downloading - Secure Callback Yes Yes Yes Yes No Yes
Downloading - Modem Baud Rate Yes Yes Yes No No No
Downloading - IP address No No No No Yes Yes