Cooper Menvier Menvier 9651, Руководство пользователя

Страница: 9 / 28

2. Everyday Operation
496930 Page 9
Part Setting
The Installer may have programmed your system so that you can protect
part of the premises while the rest is in use. Level keys B, C and D give
different part set areas. Level key A always sets the full system. Ask your
Installer which zones keys B, C and D cover.
To part set:
1. Close doors and windows in the protected area.
2. Key in your access code or present a tag at the keypad.
3. Press B, C or D.
The keypad starts the quiet Part
Set exit tone (see "Instant Set").
Part set exit tone
Note: Some Levels on your system may be programmed for Silent Set.
When setting these Levels the system does not give any tones from the
keypads or internal sounder.
4. Leave via the designated exit route and if necessary close the
final door.
The exit tone stops and the
system sets. The system gives a
double "beep" and the keypad
display shows which Level is
set.
"beep beep"
Instant Set
The area protected by a part set system may not need an exit route or final
exit door. For these areas the Installer may program the B, C or D keys as
Instant Set. With Instant Set the system sets as soon as you press B, C or D.
The system gives a double "beep" to show that it is set.
Note: Instant set is not available for key A (Full Set).
Setting B 009
Level B Set