Cooper Menvier Menvier 9651, Руководство пользователя

Страница: 8 / 28

2. Everyday Operation
Page 8 496930
Final Door Set
With Final Door Setting the system sets when you close the last door. There
is no fixed exit time.
1. Close all doors and windows.
2. Key in your access code or present a tag at the keypad.
3. Press the appropriate Level key.
The keypad starts the continuous
exit tone.
Exit tone
4. Leave via the designated exit route and close the final door.
The system sets seven seconds
after you close the door and gives
a double "beep".
"beep beep"
The keypad display shows which Level is set.
Using an Exit Terminate Button to Set the System
An Exit Terminate Button is usually a button mounted outside the premises
by the final door. Pressing the button completes setting the system.
1. Close all doors and windows.
2. Key in your access code or present a tag at the keypad.
3. Press the appropriate Level key.
The keypad starts the continuous
exit tone.
Exit tone
4. Leave via the designated exit route. Close the final door.
5. Press the exit terminate button.
The exit tone stops and the
system sets seven seconds after
you press the button. The system
gives a double "beep" and the
keypad display shows which
Level is set.
"beep beep"
Note: The Installer may have programmed your system to set after a fixed time even
if you do not press the exit terminate button. This is to make sure your premises
are protected even if you forget to press the exit terminate button. Ask your
Installer how your system is set up.
Setting A ---
Level A set
Setting A ---
Level A set