Cooper Menvier Menvier 9651, Руководство пользователя

Страница: 19 / 28

496 930
4. Special Functions
Introduction
From the keypad you can perform a number of other functions, apart from
setting and unsetting the system. These functions are:
[Access code] +
X
Omitting zones.
[User 01 Access code] + 4 Changing access codes and user names.
[Access code] + 5 Reading the system log.
[User 01 Access code] + 6 Setting the time and date.
[Access code] + 7 Turning the chime on or off.
[Access code] + 8 Testing the sounders.
[Access code] + 9 Testing the zones.
To use these functions you must key in your access code or present a tag
and then press a number key. The rest of this section describes each
function in turn.
Omitting Zones
Your system may be programmed so that you can omit individual detectors.
Ask your Installer which zones can be omitted.
To omit a zone:
To set the system with an omitted zone:
1. Key in your access code or present a tag and press
X
.
The display shows:
2. Press the number of the zone you want to omit
(for example, key in 07 to omit zone 7).
3. Press
Y
.
The sounder gives a double beep and the
display shows the zone number followed by an
"o":
Note:
If the display shows a “x” after the zone number then you cannot omit
that zone.
To omit further zones repeat steps 2 and 3.
4. Press
X
to finish.
Omit Zone?
Omit Zone 07o