Cooper Menvier Menvier 9651, Руководство пользователя

Страница: 7 / 28

2. Everyday Operation
496930 Page 7
Timed Set
With Timed Set the system sets after a programmed exit time has expired.
Ask your Installer to make sure the exit time is long enough for you to leave
the premises and close the final door.
1. Close all doors and windows.
2. Key in your access code or present a tag at the keypad.
3. Press the appropriate Level key.
Note: If you press
Y
at this point the system sets at Level A.
The exit time starts when you press
Y
or the Level key. During the exit
time the keypads give a continuous
exit tone to warn you that the timer
is running.
Exit Tone
If you hear an interrupted tone from
the keypads or internal sounder then
something is triggering one of the
detectors. (See also "If The System
Will Not Set" on p12.)
4. Leave via the designated exit route. Close the final door.
At the end of the exit time the
system sets, and gives a double
"beep". The keypad display shows
which Level is set.
"beep beep"
Note: If you change your mind about setting the system then key in your access code
again.
Exceeding the Exit Time
If something is triggering a detector at the end of the exit time then the
system starts an alarm and
does not set. You can cancel this false alarm by
entering your access code immediately. The keypad display shows which
zone(s) is causing the problem.
When you have cancelled the alarm you will have to reset the system (see
"Resetting the System" on p17) and restart the setting procedure.
Setting A 009
Level A set