8
Safety Instructions
WARNING
: Shock hazard –
All wiring of connectors or otherwise should be
done by a technician, electrician, or person with electrical experience.
At the beginning of this guide there is a section of warnings and cautions,
take note of any precautions concerning the installation.
Prior to engaging in any service, all AC and DC power sources need to be
disconnected and all AC and DC devices and generators need to be
disabled.
Follow proper cable routing and strain relief guidelines.
Installation Codes
Installation codes vary depending on specific industry, location and application of
inverter.
It is the installer’s responsibility to ensure that all applicable installation
requirements are met.
