26
To adjust alarm settings:
By default, the alarm is
ON
.
Press and hold the
Select
button for two seconds. The screen will display one of two things:
“
AL0
” – this indicates the alarm is
OFF
“
AL1
” – this indicates the alarm is
ON
The screen will display the setting (either
AL0
or
AL1
) briefly and then return to the previous
screen.
Note:
The alarm setting will revert back to default (
ON
) when the
Inverter
button is turned OFF
then ON again.
To adjust the charging current:
By default, the charging current is as follows:
20A for the
12-110-1000-B2
40A for the
12-110-1800-B4, 12-110-1000-B4
1.
Press and hold the
Inverter
button for five seconds. This brings the inverter into Charge
Current Setting Mode.
2.
Press the
Select
button to switch between the different current ratings in [Amps].
2 – 5 – 10 – 20 for the
12-110-1000-B2
2 – 10 – 20 – 40 for the
12-110-1800-B4, 12-110-1000-B4
3.
To choose a current setting, stop at the value displayed and wait five seconds to set it.
Once the current is set, the display will return to the previous screen.
Unit performance can be maximized using
Table 3-1
below.
