Air Source Heat Pump Water Heater
32
If the unit is not used for a long time, turbid fluid may come out from the
tap when the unit is started again (or started for the first time). This is a normal
phenomenon. Wait a moment, the turbid fluid will disappear.
(3) Power outage
①
If an outage occurs when the unit is running, all tasks are stopped.
②
The wired controller has a power memory function.
③
If a malfunction occurs due to lightning or car radio, manually cut off the
power switch, and then power on the unit again.
(4) Power memory function
Every time before the power of the water heater or wired controller is cut off,
the wired controller automatically memorize the power switch status of the unit. After
the power is restored, the wired controller sends power-on/power-off signals to
the water heater according to the status memorized before the power is cut off. This
ensures that the unit can run according to the original status after the power is
restored.