Air Source Heat Pump Water Heater
13
6 Installation of the Water Tank
(1)
The water tank can be installed outdoors with the main unit, for example,
installed in the balcony, roof, or ground. It can also be installed inside the room. Try
to install it in an environment where the temperature is higher than 0°C. The
hot water outlet should not be too far away from the locations for use. Lay out the
pipes in a centralized manner, and take thermal insulation measures on hot water
piping to reduce heat loss.
(2)
The water tank must be placed upright with all feet touching the ground. It
must be installed on a solid foundation. During water tank installation, consider
the weight bearing capability of the foundation. Figure 6-1 shows the installation
diagram.
Figure 6-1 Fastening of the water tank
Note: The water tank must also be fastened to the wall using a tank mounting
hoop or plate to prevent fall-off the water tank due to exceptions.
(3)
There should be water pipes, hot water interfaces, and floor drains to
facilitate water replenishment for the water tank, hot water supply, and drainage.
