9
START
BUTTON
STOP
BUTTON
MANUAL
BUTTON
TIME
ADJUST
BUTTONS
TIMER
BUTTON
Figure 7 - clock display
Please note: For Fully-automatic cooking the clock must be set to the correct time of day.
When the oven is connected to the mains supply the timer digits, (
12.00
) and the
hand symbol
flashes
on the display.
Press the MANUAL
button.
The dots between the hours and minutes starts flashing.
Press the ‘+’ or ‘–’ buttons until the correct time of day is displayed.
After 5 seconds the clock display is constant.
Adjusting the display brightness
The display has 3 brightness levels. It is factory set to the highest level. To adjust the brightness level press
the ‘+’ button.
POWER FAILURE
In the event of a power failure the oven will automatically switch OFF, any cooking programmes stored in
the memory will be cleared and the hand symbol
will flash in the display. The clock display will show
12.00
so the clock time will have to be reset.
Setting the oven clock
PLEASE NOTE: If the oven does not respond to its controls it may be in automatic mode. Press the
MANUAL
button to return to manual cooking.
