Cooker controls
Before using your cooker for the first time:
Read the operating and safety instructions thoroughly.
If you have not already done so, follow the steps in the “Preparation” section on page 7.
Familiarise yourself with the controls (Figure 8).
FRONT
LEFT HOB
BURNER
BOTTOM OVEN
TEMPERATURE
CONTROL
PROGRAMMING
CONTROLS
TOP OVEN
TEMPERATURE
CONTROL
BACK
LEFT HOB
BURNER
CLOCK
DISPLAY
TEMPERATURE
INDICATORS
FRONT
RIGHT HOB
BURNER
BACK
RIGHT HOB
BURNER
Figure 8 – controls
Using the hob
Figure 9 -Burner Controls
Figure 10 - Hob Control Knob
1
4
3
2
1
2
3
4
LOW
FLAME
HIGH
FLAME
Igniting the burners
Before switching on a hob burner, make sure that the selector knob you are using corresponds to the
burner you wish to switch on (Figures 9 and 10). To ignite a burner press and turn the corresponding contol
knob clockwise until the high flame position is reached. Press the ignition button (Figure 8) until the burner
ignites.
Adjusting the flame
Adjust the flame size by turning the control knob (Figure 9). Use the appropriate level of flame for the type
of cooking you are doing and use suitably sized pans for the different burners.
The size of the flame should only be regulated within the range between and (Figure 10).
Turning off the burners
To turn off the burner, turn the control knob anti-clockwise to the position.
Burners supplied from an LPG cylinder
Before lighting the first burner, open the valve on the LPG cylinder. Then light the burner using the method
described above.
When closing the flow of gas, before turning off the last burner close the valve on the LPG cylinder. When
the flame has gone out, close the tap of that burner.
When the hob is not in use the valve of the LPG cylinder should be closed.
10
