5.6 Setting Up Units in a Stacking Kit
Rules for safely setting up the units in a stacking kit
Observe the following rules in order to ensure that the stacking kit with the units will have the required
stability:
■
Make sure that the units placed on the top and bottom of the stacking kit are similar in terms of
weight.
■
Do not, under any circumstance, only place a unit on the top of the stacking kit.
■
It must be possible to set up the stacking kit at the installation location in such a way that it will not
topple over or shift. All supporting surface requirements must be met.
How to set up the units in the stacking kit
Follow the steps in the separate assembly and installation instructions to install and set up the units in
the stacking kit.
5 Setup
Installation Manual
39
