Manual CC 5307
23
SYNC:
Two synchronisation modes are available, INTERNAL and EXTERNAL LINE-LOCK. In LINE-
LOCK mode, it synchronises the video signal between cameras without a synchronous generator.
The line-lock synchronisation is only used in areas of 60Hz (NTSC Models) / 50Hz (PAL Models).
- INT: Internal synchronisation
- LL: External line-lock synchronisation
• If 'LL' is selected, it can be adjusted to the desired phase. Press the SET button.
• Adjust to the desired phase from 0 to 160.
Note
When using AC power, Line-Lock synchronisation can be used.
When the power is DC12V, the SYNC menu is fixed to the INT mode.
COMM ADJ. (Pelco-D Protocol):
This function sets up the camera communication status when controlling the camera through an
external device.
1. When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the cursor
points to 'COMM ADJ'.
2. Set up the mode using the 4 direction buttons.
- CAM ID: Determines the camera's identification number. (between 0 and 255).
- BAUD RATE: Select 2400 / 4800 / 9600 / 19200 / 38400 bps.
Reset:
Resets the camera settings to the factory default.
Return:
It returns to the MAIN menu.
EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
