Convision CC-5307, Руководство пользователя

Страница: 10 / 25

Manual CC 5307 10
1. Dome Base Mounting
- Open the dome cover by loosening 3 screws using special wrench provided.
- Mount the base of camera to a sturdy using 4 screws (1.5 inch) and 4 premade holes on the base of
the dome.
2. Power Connect & Monitor Impedance
- DC12V/300mA regulated power supply (DC12V only) AC24V Class 2 power supply (AC24/DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75 Ω . Check the impedance switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and angle of camera.
- Make sure to retighten the screws for camera bracket.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten the ring.
ƒ
Cable Connection
Control via RS-485 Interface (Optional)
The camera can be controlled by using external controllers like a Remote controller.
(RS-485 Communication)
• To control using a DVR or System Controller
Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485
control board that is connected to the DVR or System Controller.
485 Control Board Connection Port RS-485 Control Port
(+) CONNECTION TERMINAL (TRX+) 485+
(- ) CONNECTION TERMINAL (TRX -) 485-