Manual CC 5307
16
Note
• If you press the SET button in 'AUTO' mode, You can adjust brightness by increasing or decreasing
the shutter speed. (X2~X512)
• Note that the higher the level, the brighter the screen, but the more likely it is that an after-image will
appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the level is
increased, this is normal.
●
RETURN: It returns to the MAIN menu.
White Balance
The screen colour can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to WHITE BAL on the SETUP menu by using the UP
and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
¾
Please select on of the 5 modes below.
ATW:
Select when the color temperature is between 1800°K and 10500°K.
AWC:
To obtain the optimum state under the current luminance levels, direct the camera to
point toward a sheet of white paper and press the SET button. If the environment changes,
including the light source, the white balance will require re-adjustment.
MANUAL
: Select to "fine-tune" the White Balance manually. Set White Balance first using the
ATW or AWC mode. Afterwards switch to MANUAL mode, fine-tune the White Balance and
then press the SET button.
INDOOR:
Select when the color temperature is between 4500
˚
K and 8500
˚
K
OUTDOOR
: Select when the color temperature is between 1800
˚
K and 10500
˚
K. (Sodium light
inclusion)
