Manual CC 5307
17
Note
• Under the following conditions the WHITE BALANCE function my not operate properly. In such cases,
please select the AWC mode.
1. When the objects surroundings have a very high colour temperature (eg, a clear sky and sunset)
2. When the objects surrounding are dark.
3. If the camera directly faces a fluorescent light or is installed in a place where there are considerable
changes in illumination, the WHITE BALANCE function may become unstable.
BACKLIGHT
This camera is designed to deliver a clear and distinct image of both subject and background, even
when the subject is in a backlight.
1. Position the cursor to point to BACKLIGHT on the SETUP menu screen using the Up and Down
buttons.
2. Select the desired mode using the Left and Right buttons.
WDR :
When the image has simultaneous bright and dark areas, the Wide Dynamic Range
makes both areas distinct.
OFF :
Deactivates the WDR function.
BLC :
Enables the user to directly select an area of a picture to activate and control.
3. Select the desired mode using the Left and Right buttons and press the SET button.
•
Select 'WDR' to adjust the LEVEL, FRONT, BACK.
- LEVEL: It controls entire WDR range.
- FRONT: It controls front WDR range.
- BACK: It controls back WDR range.