Manual CC 5307
14
Lens
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow to point to LENS by
using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.
- DC: Select Auto Iris Lens
You can adjust the minimum shutter and maximum value of ESC shutter mode when DC Lens mode
is selected.
Note
• Some lenses may not work properly, depending on the settings for the IRIS LEVEL.
• When Using a Video-Type Auto Iris Lens
1. Check that the ALC adjustment on the lens is appropriate. In general, set it to AV (Average).
2. It may not work properly depending on the installed lens. Set the Level VR of the lens to the optimal
value.
3. Set AGC / SENS-UP to OFF and adjust the Lens VR to an appropriate brightness.
4. Adjust the Lens VR, adjust the IRIS LEVEL, and then check if the screen brightness changes
properly. Otherwise, adjust the Lens VR again.
- Manual: Select Manual Lens
