Manual CC 5307
11
Note
• To control the camera by constructing an additional controller, use Pelco-D protocol.
(Go Preset 95: Enters into OSD menu or Set key function)
Installation (Adaptor Plate)
* When installing on an adaptor plate bracket.
1. Place the adaptor plate bracket on a flat installation surface and fix it with the screws provided.
2. When placing the camera body onto the plate, insert the plate pin into the corresponding holes on the
camera body as shown in figure-1. Lock the camera in place by turning the camera body clockwise.
3. When placing the camera body on the plate, make sure that the power and video cables pass
through.
4. After installation and adjustment of the camera is complete, secure the dome cover by turning it
clockwise.