Manual CC 5307
22
3.
Press the SET button.
4.
Use the 4 directional buttons to move to a character, and select it by pressing the SET button.
Repeat this action to enter multiple characters. Up to 15 alphanumeric characters can be used.
Note
If the cursor is moved to CLR and the SET button pressed, all letters are deleted. To edit a letter,
change the cursor to the bottom left arrow and press the SET button. Move the cursor over the letter to
be edited, move the cursor to the letter to be inserted and then press the SET button.
5. Enter a title, move the cursor to 'POS' and press the SET button. The entered title appears on
the screen. Select the position to display the title on the screen using the 4 directional buttons and
press the SET button. When the position is determined, select 'END' and press the SET button to
return to the SPECIAL menu.
D-Zoom:
Digitally zooms, the range is x1~x32.
Motion Detection:
This camera displays an on-screen message whenever motion is detected.
1. When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the cursor
points to MOTION DET.
2. Set up the function using the 4 directional buttons.
- AREA: Up to 4 areas are selectable.
- MODE: Determines whether to use the MD area selected.
- Adjust the size of the area to be observed by selecting the LEFT, RIGHT, TOP or BOTTOM.
- SENSITIVITY: When the SENSITIVITY value is high, motion detection sensitivity is increased to
recognise small movements.
- RETURN: It return to the SPECIAL menu.
Note
MD areas show only on the Motion Det menu. Therefore, MD areas are not displayed on the monitor
screen.
PRIVACY
: Hide an area so that it is not displayed on the monitor.
1. When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the
cursor points to 'PRIVACY'.
2. Set up using the 4 directional buttons.
- AREA: Up to 8 areas are selectable.
- MODE: Determines whether to use the area selected in the AREA SEL, and the size and position
of the area.
- Adjust the size of the area to be observed by selecting the LEFT, RIGHT, TOP or BOTTOM.
- MASK TONE: Determine area mask tone density.
- RETURN: It return to the SPECIAL menu.
