Converteam GEMTEQ I/O GEM80 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 103

background image

GEMTEQ I/O Scope

SAFETY INSTRUCTIONS

Care has been taken with the design of this product to ensure that it is safe. However, in common with all
products of this type, misuse can result in injury or death. Therefore, it is very important that the
instructions in this manual and on the product are observed during transportation, commissioning,
operation, maintenance and disposal.

This technical manual should be regarded as part of the product. It should be stored with the product and
passed on to any subsequent owner or user.

Local safety laws and regulations must always be observed.

Persons working on the product must be suitably skilled and should have been trained in that work for
these products.

The product is a component designed for incorporation in installations, apparatus and machines.

The product must not be used as a single item safety system. In applications where maloperation of the
product could cause danger, additional means must be used to prevent danger to persons.

Product approvals and certifications will be invalidated if the product is transported, used or stored outside
its ratings or if the instructions in this manual are not observed.

In the European Union:

Products within the scope of the Low Voltage Directive, 2006/95/EC as amended are CE marked.

The product complies with the essential protection requirements of the EMC directive 2004/108/EC as
amended, when installed and used as described in this manual. The requirements of the EMC Directive
should be established before any installation, apparatus or machine which incorporates the product is
taken into service.

A machine should not be taken into service until the machine has been declared in conformity with the
provisions of the Machinery (Safety) Directive, 98/37/EEC.

GEMTEQ I/O Technical Manual (T2031En)

Page v

Rev.02 (10/10)

«
...
3
4
5
6
7
...
»

Содержание GEMTEQ I/O GEM80








































































































Отзывы:

Нет отзывов

Похожие инструкции для GEMTEQ I/O GEM80

Бренд: U-Prox Страницы: 31

Бренд: Mamas & Papas Страницы: 44

Бренд: Mamas & Papas Страницы: 8

Бренд: Omegalink Страницы: 2

Бренд: MamaLove Страницы: 9

Бренд: YUGE Страницы: 69

Бренд: Quectel Страницы: 232

Бренд: Quectel Страницы: 9

Бренд: Quectel Страницы: 73

Бренд: TCS Страницы: 16

Бренд: Velleman Страницы: 26

Бренд: Velleman Страницы: 32

Бренд: Velocity Страницы: 84

1E0671-1 MCR2.9

Бренд: Haberl Electronic Страницы: 9

Бренд: J+J Страницы: 2

Бренд: Game ready Страницы: 24

Бренд: Sven Страницы: 6

Бренд: Euromatic Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды