Contec IPC-BX/M560, Руководство пользователя

Страница: 69 / 90

Functions of Components
IPC-BX/M560(PCW)
58
* 013Bh: Event output control
PO2
M
rsv*
R/W RESET: 10X00X00b
PI2M PI0M
rsv* WDT
M
WDT
E
NMIE
D6 D5 D4 D3 D2 D1 D0 D7
Figure 5.10. Event Output Control Port (013Bh)
WDTE : Enables the watchdog timer event output.
0 : Disables the output event when the watchdog timer
causes a time-out.
1 : Enables the output event when the watchdog timer
causes a time-out.
WDTM : Watchdog timer event output mode
0 : Sets the event output when the watchdog timer causes
a time-out to NMI.
1 : Sets the event output when the watchdog timer causes
a time-out to RESET.
PO2M : PO2/WDT(12) output mode
0 : Sets the RAS connector PO2/WDT(12) signal to PO2
(general-purpose output).
1 : Sets the RAS connector PO2/WDT(12) signal to
alarm-out output.
• The ALARM LED on the front panel of the main unit comes on if
an alarm output occurs in the alarm-out output mode.