Contec AD12-8(PM) Скачать руководство пользователя страница 58

Страница: 58 / 81

4. Functions

AD12-8(PM)

Delay

Delayed sampling is performed after the sampling stop condition is satisfied.

When a sampling stop condition other than the software abort command is satisfied, the PC card

performs sampling for the specified number of times of delayed sampling to store input data to memory.

If you set the number of times of delayed sampling to 0, the PC card stops sampling the moment the

sampling stop condition is satisfied.

Event

”Event” works as a function for reporting the occurrence of a certain PC card state to the application.

The following events can be used in combination depending on the specifications and purpose of the

application.

”AD conversion start condition satisfied” event

This event occurs when the AD conversion start condition is satisfied. The event is nullified when

the conversion start condition is “software”.

”Repeat end” event

This even occurs whenever a repetition is completed.

”End of device operation” event

This event occurs when the entire operation including repetitions is completed.

”Stored specified sampling times” event

This event occurs when sampling has been performed for the number of times set by software.

This event can only be used in device buffer mode.

"Specified number of transfers" event

This event occurs each time a specified number of samples (set by software) has been completed.

This event can only be used in user buffer mode.

- Overflow

event

This event occurs at an attempt to store input data with the memory full.

Sampling clock error event

This event occurs when conversion stops as an error occurs due to a sampling clock period that is

too short.

AD conversion error event

This event occurs when conversion stops due to an AD conversion error.

2. Starting/Stopping Operation

Sampling is started by the software command.

Once started, sampling can be stopped by the software command at any timing.

Содержание AD12-8(PM)


















































































Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды

Contec AD12-8(PM), Руководство пользователя

Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды