Contec AD12-8(PM) Скачать руководство пользователя страница 27

Страница: 27 / 81

2. Setup

AD12-8(PM)

Step 3 Installing the Hardware

Windows needs to detect the I/O address and interrupt used by the PC card. This is called hardware

installation.

When using more than one PC card, install the PC cards one at a time and do not install the next PC

card until setup is complete for the previous PC card.

Turning on the PC

(1) Insert the PC card into the card slot on the PC.

(2) Turn on the power to your PC.

If using Windows XP, 2000, Me, 98, or 95, see the "When Using API-AIO(WDM)" or "When Using

API-AIO(98/PC)" section. If using Windows NT, see "PC Card Configuration Settings".

CAUTION

The PC card cannot be properly installed unless the resources (I/O addresses and interrupt level) for

the PC card can be allocated. Before attempting to install the PC card, first determine what PC

resources are free to use.

The resources used by each PC card do not depend on the location of the PCI bus slot or the PC

card itself. If you remove two or more PC card s that have already been installed and then

remount one of them on the computer, it is unknown that which one of the sets of resources

previously assigned to the two PC cards is assigned to the remounted PC card. In this case, you

must check the resource settings.

When Using API-AIO(WDM)

(1) The “Add New Hardware Wizard” will be started.

Select “Specify the location of the driver”, then click on the [Next] button.

Содержание AD12-8(PM)


















































































Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды

Contec AD12-8(PM), Руководство пользователя

Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды