Contec AD12-8(PM) Скачать руководство пользователя

Страница: 18 / 81

2. Setup

AD12-8(PM)

Step 1 Installing the Software

This explains how to install the driver library.

Before installing the hardware on the PC, install the driver library from the API-PAC(W32)

CD-ROM provided with the

PC card

The following description assumes the operating system as Windows Me. Although some user

interfaces are different depending on the OS used, the basic procedure is the same.

Which Driver to Use

CONTEC has two analog I/O drivers: API-AIO(WDM) and API-AIO(98/PC)W95/NT.

API-AIO(WDM) is a new driver for analog I/O under Windows.

This driver was developed to be easier to use and to provide additional functions above those provided

by the previous API-AIO(98/PC) driver.

CONTEC recommends that you use the API-AIO(WDM) driver for analog I/O devices. Although the

API-AIO(WDM) will support future OS versions and new devices, there is no plan to support Windows

NT4.0, Windows 95, the ISA bus, or C bus.

If your require support for one of these, please use the API-AIO(98/ PC) driver.

The figure below shows a selection guide to help you select which drivers you can use.

Windows XP/Windows 2000

Windows Me/98

Windows 95/Windows NT4.0

PCI Bus, PC Card

ISA Bus

First time to use

analog board

Already using
analog board

VC6.5, VB6.5,

Delphi, C++Builder

VC4, VC2, VB4

Operating system

Device type

Is this the first time to use
an analog board?

Development system

API-AIO(98/PC)W95, NT

Can you upgrade your existing
API-AIO(98/PC)W95,NT
based system?

Yes

API-AIO(WDM)

Содержание AD12-8(PM)


















































































Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды

Contec AD12-8(PM), Руководство пользователя

Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды