Contec AD12-8(PM) Скачать руководство пользователя

Страница: 49 / 81

3. External Connection

AD12-8(PM)

Analog Output Signal Connection

This section describes examples of connecting analog output signals using flat cable or shield cable.

The following is an example of how to connect using a cable such as a separately purchased flat cable

(PCA37P).

Connect the analog output and analog ground to the input and ground respectively on the external

device.

Digital Multi-Meter etc.

Analog Output

Analog Ground

CARD

Connector

Cable

Target

Figure 3.6. Analog Output Connection (Flat Cable)

The following figure shows an example of shielded cable connection. Use shielded cable if the

distance between the PC card and external device is long or if you want to provide better protection

from noise. For the CN1 analog output, connect the core wire to the signal line and connect the

shielding to ground.

Analog Ground

Shield cable

Analog Output

CARD

Connector

Target

Digital Multi-Meter etc.

Figure 3.7. Analog Output Connection (Shield Cable)

CAUTION

If the PC card or the connected wire receives noise, or the distance between the PC card and the

target is long, data may not be outputted properly.

For analog output signal, the current capacity is ±5mA (Max.). Check the specification of the

connected device before connecting the PC card.

Do not short the analog output signal to analog ground, digital ground, and/or power line. Doing

so may damage the PC card.

Do not connect an analog output signal to any other analog output, either on the PC card or on an

external device, as this may cause a fault on the PC card.

Содержание AD12-8(PM)


















































































Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды

Contec AD12-8(PM), Руководство пользователя

Результаты поиска

Содержание AD12-8(PM)

Отзывы:

Похожие инструкции для AD12-8(PM)

Бренды по названию

Популярные бренды