CONSTRUCTA 9000472481, Инструкция по эксплуатации

Страница: 60 / 76

60
Operating the appliance
In this section, you will find out how to use your appliance,
change the basic settings, and when your appliance switches
off automatically.
Switching on the appliance
1.
Turn the operating mode selector until the symbol for the
desired operating mode illuminates.
A default temperature appears on the temperature display.
2.
Turn the temperature selector to change the default
temperature.
The appliance begins heating.
Notes
■
The steam cooking
é
and Hydro clean
>
operating modes
can only be started if neither
•
nor
œ
are displayed in the
temperature display.
■
If no default temperature is displayed, the temperature for
your selected operating mode is a fixed setting. You cannot
change this temperature.
Current temperature
Press the info button. The current temperature appears for 3
seconds.
Note:
The current temperature can only be displayed with
operating modes with a default temperature.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment.
■
Temperature reached (figure A)
■
Appliance reheating (figure B)
Switching off the appliance
Turn the operating mode selector to the
Û
position. The
appliance is switched off.
The appliance has a cooling fan. After the appliance is
switched off, the cooling fan may continue to run.
You can see in the temperature display whether there is high or
low residual heat in the cooking compartment.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
The appliance must be switched off and controls must not be
locked.
1.
Press and hold the info button for 3 seconds to go to the
basic settings menu.
™‚‹
appears in the temperature display.
2.
Press the info button briefly and repeatedly until the setting
symbol for the current basic setting of a submenu is
displayed in the temperature display (e.g.
™„ƒ
).
3.
Using the temperature selector, set the required basic setting
within a submenu (e.g.
™„„
).
4.
Press and hold the info button for 3 seconds.
Your basic setting is saved.
You can change the following basic settings:
Operating mode Default
temperature in
°C
Temperature
range in °C
3
Hot air 160 40 - 200
A
Defrost Fixed setting -
%
Top/bottom heat 170 50 - 275
0
Circotherm intensive 220 50 - 275
ë
Bread-baking 200 180 - 220
$
Bottom heat 200 50 - 225
4
All-round grilling 170 50 - 250
+
Full-surface grill 220 50 - 275
(
Centre-area grill 180 50 - 275
é
Steam cooking Fixed setting -
>
Hydro clean Fixed setting -
\
Light Fixed setting -
Temperature
display
Meaning
•
Residual heat high (above 120 °C)
œ
Residual heat low (between
60 °C and 120 °C)
Basic settings menu
Submenu
Basic setting Setting
symbol
Childproof lock Appliance controls
unlocked
™‚‹
Appliance controls locked
™‚‚
Appliance controls
permanent lock
™ƒ‚
Audible signal Audible signal off
™‚‹
Audible signal 30 seconds
™„‚
Audible signal 2 minutes
™„ƒ
Audible signal 10 minutes
™„„
A B