52
13. Setting the Time/Date
• First use the "MODE" button to switch to the world time display mode ("
" symbol appears
in the display).
• Use the "
" and/or "
" buttons to select the corresponding capital city or world time (e.g.
"BERLIN" for Germany/Austria/Switzerland, "PARIS" for France etc.).
If "USERCITY" is selected, you can enter your own desired city name (e.g.
"VIENNA" for Austria) and the corresponding world time (e.g. GMT +1 hour for
Austria).
Press the "MENU" button, "
EDIT" appears. Confirm this by pressing the
"ENTER" button (CANCEL to cancel if you wish).
"CITY" appears and the first letter of "USERCITY" flashes.
Use the "
" and/or "
" buttons to select the desired letter at the flashing
cursor position and confirm the letter with the "ENTER" button. Continue in the
same manner with all the other letters.
The "CANCEL" button can be used to exit the entry mode (after you are asked
once to be sure).
Press the "MENU" button to access the timezone setting mode. Use the "
"
and/or "
" buttons to make your selection and confirm with the "ENTER"
button.
• Press "ENTER" for confirmation.
• Press the "MODE" button repeatedly until the display shows the time.
Ensure that the world time is
not
displayed, the symbol "
" should
not
be
visible!
The setting of the time/date is only possible if the "normal" time is shown in the
display and not the world time.
• Hold down the "ENTER" button for approx. three seconds until the selection options for the
date formats appears.
• You can use the "
" and/or "
" buttons to select the desired order of display for the date,
month and year. Confirm the setting by briefly pressing the "ENTER" button.
• Use the "
" and/or "
" buttons to switch between the 12h and 24h mode for the time (in
the 12 h mode the second half of the day has a "p" placed behind the minute display). Confirm
the setting by briefly pressing the "ENTER" button.
