.
Page 58
15/09/2004
PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
BOARD PHYSICAL EQUIPMENT
Enter the equipment number of the card containing the pre-configured announcements (4
digits for F1 and 006 for F6).
Note:
For F6, the voice mail system's virtual card on the UCT card contains pre-
configured annoncements. Its equipment number is 006.
CATALOGUE NUM/GUIDE
Enter the catalogue number (if different from 0) and the announcement number (value
between 1 and 255).
When the bothway connection is made with the first time interval allocated to the message
function, you can listen to the selected message.
Note:
To view the number of an announcement, display the announcement list.
LABEL
When the announcement number is validated, enter the message name.
DURATION IN SEC.
When the announcement number is validated, enter the message duration.
RECORDING PARAMETERS
CATALOGUE-MIXED GUIDE
Enter the catalogue number (if different from 0) and the number of the announcement to be
mixed (value between 1 and 255).
This field is only filled in if mixing is requested. Therefore, the announcement which will be
combined with another announcement must logically be a background melody on which
another message is to be superimposed.
RECORDING LEVEL
Enter the recording level (value between 1 and 255).
ATTENUATE MUSIC BY VOICE
NO
YES
Select YES to lower the music level when someone speaks: this parameter is also known
as fading.
START RECORDING
NO
YES
Select YES to start recording the message. During the operation, the message "Work In
Progress" is displayed. When the card detects the end of the operation, the recording
stops and the message is played back.
After playback, you can make further recordings with different recording and sound levels.
