.
Page 182
15/09/2004
PS8149KENAA01
Ce document est la propriété de EADS et ne doit pas être reproduit ou communiqué sans autorisation.
This document is the property of EADS and may not be copied or circulated without authorisation.
OPTION: CAB/CARD/EQT - LISTEN.DEV.
(
M6501L/R IP PBX AND XL/XS/XC)
This option is used to set up a connection between the equipment which emits the tone
(analogue or digital set) and the control equipment.
Enter the cabinet number and the listening device card number (5 digits).
Note:
The field
E-TONE
indicates that the tone can be put in service. Use a prefix to
request that a message be replaced by a tone or vice-versa (see the menu for
accessing voice announcement features).
ANNOUNCEMENT DURATION (SEC)
By default the duration is unlimited. To limit the duration, enter the desired duration here
(limiting the listening time releases TSs more rapidly for other synchronised use). It is
advisable to take account of the length of the recorded message.
OVERFLOW ON COMMON TIMESLOTS ALLOWED
YES
NO
Select YES to specify whether the TS output search can use the common TSs on the card
(CCS, BVF, SVF-MEVO).
ORIGIN SITE (SIGNAL TYPE: MULTISITE ANNOUNCEMENT)
Select an origin site.
ORIGIN CLUSTER (SIGNAL TYPE: MULTISITE ANNOUNCEMENT)
Enter a numerical value from 2 to 99.
Note:
The MMC does not check that there is a device in the cluster site specified. For
an internal site, the cluster number is 2.
DEVICE NUMBER (SIGNAL TYPE: MULTISITE ANNOUNCEMENT)
Enter a numerical value from 0 to 767.